Compliance, Fatigue & Safety FAQs
148 questions and answers on compliance, fatigue & safety for Australian field teams. Each answer stands on its own and links to the guide that covers it in full.
What is the chain of responsibility?
The chain of responsibility is the part of Australia's Heavy Vehicle National Law that makes every business that influences the use of a heavy vehicle over 4.5 tonnes responsible for its safety, not just the driver. Each party must ensure the safety of its transport activities so far as is reasonably practicable, must not cause or encourage a driver to speed, drive fatigued or breach their hours, and cannot transfer the duty by contract. It applies in every state and territory except Western Australia and the Northern Territory, which run their own arrangements.
Who are the parties in the chain of responsibility?
There are ten functions: employer of a driver, prime contractor engaging a self-employed driver, operator, scheduler, consignor, consignee, packer, loading manager, loader and unloader. A business is a party because of the function it performs, not its title or contract, and performing several functions does not multiply the duty. Drivers are not parties; they hold separate duties, including a personal duty since 1 August 2026 not to drive while impaired by fatigue or unfit.
Does the chain of responsibility apply on a mine site?
Not on a gated haul road that the public cannot use, because the law applies to transport activities on a road, which it defines as an area open to or used by the public. Haul trucks and plant that never leave the pit are governed by WHS and mining safety law instead. A registered water cart, tipper, float or crew bus that uses a public road is in the chain, and the driver's on-site work with that vehicle that day counts toward their work and rest limits. Time operating other plant does not count under the HVNL, although it is fatigue the WHS duty must manage.
Is a labour hire host in the chain of responsibility?
Yes, if it schedules the driver's shifts or directs the use of the vehicle, which makes it a scheduler and usually an operator. The labour hire provider is the driver's employer and is in the chain too. The primary duty cannot be transferred or delegated by contract, so both hold it at the same time, in the same way that labour hire and host businesses cannot contract out of their WHS duties.
What changed in the Heavy Vehicle National Law on 1 August 2026?
Four things changed for a scheduler: a personal unfit-to-drive duty for every driver of a heavy vehicle over 4.5 tonnes, the closure of BFM and AFM to new entrants, a tiered accreditation scheme, and optional written work diary entries. The driver's duty is not to drive while impaired by fatigue or unfit to drive, and chain parties must not cause or encourage it. Basic and Advanced Fatigue Management were closed to new entrants and replaced by Alternative Compliance Accreditation for fatigue, with existing accreditations valid until they expire. The accreditation scheme became the tiered Heavy Vehicle Accreditation scheme, with General Safety Accreditation as the entry point, and some written work diary entries became optional.
Is Humanz an electronic work diary?
No. An electronic work diary is an NHVR-approved device or system that replaces the written diary a fatigue-regulated driver keeps, and Humanz is not one. Humanz is the roster: it checks fatigue limits as shifts are placed, flags a breach before the booking confirms, records overrides, and captures start and finish times on phones, which gives the record keeper the rosters and timesheets the law requires. The diary records the day; the roster is what decided it.
Can you check a White Card online in Australia?
Yes in NSW, Victoria and WA, though not through a national register, because none exists. NSW cards can be checked on the Verify NSW register by name or card number, Victorian cards through WorkSafe Victoria's licence and construction induction card search, and WA cards through WorkSafe WA's card database. In Queensland and South Australia the training organisation issues the card, so that is who to ask. Whatever the state, match the card to photo ID.
How do I find my White Card number?
The White Card number is printed on the card itself. If the card is lost, NSW holders can find their details through the Service NSW White Card check, and WA holders through WorkSafe WA's card database. Elsewhere, contact whoever issued the card, which in Queensland and South Australia is the registered training organisation that ran the course. A USI transcript shows where the training was done if it was completed after 1 January 2015.
Can you look up a White Card by name?
Yes in NSW and WA. The Verify NSW register accepts a card holder's name or a card number, and WA's online search asks for the holder's first name, family name and date of birth. Victoria's search asks for the card number and the holder's surname. The regulators in the other states and territories list no public search, so the card is confirmed with whoever issued it.
Does a White Card expire?
No, a White Card carries no expiry date on paper. Most regulators treat it as lapsed, though, if the holder has been out of construction work for two years or more. So a 2011 card can still be valid, provided the holder has stayed on the tools, and asking when they last did construction work is a legitimate part of the check.
Is there a national register for contractor licences?
No. Building and trade licensing is state and territory based, so the search runs through the register where the work is performed, such as Service NSW, the VBA in Victoria or the QBCC in Queensland. High risk work licences are the partial exception, issued by states against national classes and valid everywhere.
What should be recorded when verifying a licence?
The date of the check, the register searched, the exact name searched, the result, the licence number and class, its expiry, and who performed the verification. Keep the evidence, a saved extract or screenshot, against the worker or entity it belongs to, so an auditor two years later gets an answer in minutes rather than a reconstruction.
How often should contractor licences be re-checked?
At engagement, then on a cycle matched to risk, with annual re-verification a sensible floor for ongoing arrangements. Set alerts on every expiry date you capture, licences, insurances and inductions alike, because the register won't ring you when something lapses mid-project.
Do labour hire providers need a licence check as well?
Yes, in the states that run labour hire licensing schemes. Victoria and Queensland both maintain public registers of licensed providers, and hosts in those states commit an offence by using an unlicensed one. South Australia and the ACT run schemes too. Check the provider's licence before you start on the individual tickets of the crew they send.
Does a licence check cover insurance as well?
No. Licensing registers say nothing about public liability or workers compensation, which are separate documents with their own expiry dates. Request certificates of currency directly, check the insured entity name matches the contracting entity, and diarise the expiries alongside the licence dates.
What is a document portal?
A document portal is one central platform where business documents are stored, organised, accessed and managed. It replaces the patchwork of email attachments, shared drives, USB sticks and physical filing most field businesses rely on. Unlike a plain cloud folder, it controls who can see each document, tracks which version is current and watches expiry dates.
How does a document portal differ from storing files in Google Drive or SharePoint?
Cloud folders store files but don't manage them. A document portal adds role-based access controls, expiry date tracking, audit trails, version history, and integration with operational workflows. A folder tells you where a file is. A portal tells you who's accessed it, whether it's current, and what happens when it expires. For a field business with compliance obligations, that difference matters.
What types of documents should a field business store in a document portal?
Any document with compliance, legal or operational significance: worker licences and certifications, insurance certificates, induction records, SWMS, site safety plans, employment contracts, contractor agreements, prestart check forms, incident reports, TFN declarations, and ATO-required payroll records. If you'd need to produce it for a Fair Work inspector, a WHS regulator or a principal contractor audit, it belongs in the portal.
Is a document portal mobile-friendly for workers?
In Humanz, yes. The document portal is fully accessible from the mobile app. Workers can view their compliance documents, access site safety documentation, complete and submit digital forms, and upload photos or files directly from their phone on site.
What should happen when a compliance document in the portal expires?
The expiry should flag a compliance issue in the roster, not just send a notification. Ideally the worker or contractor can't be scheduled again until the document is renewed. Alerts should also fire before the date arrives, so most expiries never bite at all.
Can subcontractors access the portal to upload their own compliance documents?
Yes. In Humanz, subcontractors can be given controlled portal access to upload their insurance certificates, SWMS and licence copies directly, so a coordinator doesn't have to chase and manually file these documents. The coordinator reviews and approves, and the document is stored against the contractor's profile automatically.
How long should business documents be retained?
Retention requirements vary by document type. Fair Work records must be kept for seven years. ATO business records for five years. Under the WHS laws, a record of each notifiable incident must be kept for at least five years from the day the regulator was notified. A document portal that keeps records indefinitely, or with configurable retention periods, satisfies all of these obligations.
What happens to documents when a worker or contractor leaves?
Their documents remain in the portal against their profile. This matters for post-employment compliance. A WHS investigation may require induction records for a worker who left the business two years ago. Deleting records when someone leaves creates risk. Retaining them in a structured portal with appropriate access controls is the correct approach.
How does the document portal handle sensitive personal information?
Humanz stores documents in a secure, access-controlled environment. Personal information such as health declarations, emergency contacts and financial details is accessible only to authorised users. This aligns with obligations under the Privacy Act, which requires reasonable steps to protect personal information held about individuals. Access controls matter more than most people assume. The Office of the Australian Information Commissioner attributed 37% of the data breaches notified to it in the first half of 2025 to human error rather than attack, which is exactly the risk restricted access reduces.
What is the minimum break between shifts for shift workers?
There's no single figure in the Fair Work Act itself. The minimum rest between shifts comes from the applicable modern award, commonly 10 hours, and as low as eight under some construction and resources awards. Starting a new shift before the rest period has elapsed usually entitles the worker to overtime rates, and the fatigue it creates is a WHS risk the employer still has to manage.
Do shift workers get extra annual leave?
Some do. Shift workers who are regularly rostered on Sundays and public holidays may be entitled to a fifth week of annual leave under the National Employment Standards, on top of the standard four. Check whether your rostering pattern triggers it before payroll assumes the default.
Do casual workers have the same rest period requirements as permanent workers?
Rest period requirements depend on the applicable Modern Award, and many awards apply minimum rest requirements to casuals as well as permanent employees. The specific provisions vary by award. The casual loading (typically 25%) compensates for the absence of certain entitlements, but it doesn't waive WHS-related rest period obligations.
Can I require shift workers to work on public holidays?
Under most Modern Awards, employees can be required to work public holidays with reasonable notice, but they must be paid at the applicable penalty rate (typically double time or double time and a half). Some awards allow substitution of another day in lieu. The specific provisions depend on the award and any enterprise agreement.
Does the Fair Work Act apply to subcontractors?
Generally no. The Fair Work Act applies to employees, not genuine independent contractors. Misclassify an employee as a contractor, though, and the Act applies retroactively, with serious penalty exposure. The Fair Work Ombudsman's guidance on contractor classification is worth reviewing for any business using subcontractors extensively.
What is the penalty for breaching Fair Work record-keeping obligations?
Penalties for record-keeping breaches are set in Commonwealth penalty units, which are indexed periodically, so any dollar figure dates quickly. A body corporate faces a multiple of the individual maximum, higher tiers apply to serious contraventions, and in cases involving systemic underpayment penalties are multiplied by the number of affected workers. Check the current penalty unit value and the applicable multiplier with the Fair Work Ombudsman rather than working from a published dollar amount.
How far back can a Fair Work underpayment claim go?
A Fair Work Inspector can investigate underpayment claims going back six years, and workers have six years from the date of underpayment to bring a claim. That's why record retention is set at seven years. It covers the full investigation window plus a buffer.
How does long service leave work for construction workers in WA?
Long service leave in WA is governed by the Long Service Leave Act 1958 (WA). In the construction industry, portable long service leave schemes may apply for workers who move between employers. That's worth verifying with WorkSafe WA or a qualified employment advisor for your specific workforce.
What is a fatigue management plan?
A fatigue management plan is an operational document setting out how a business manages the safety risk of worker fatigue: the hour and rest limits, the controls at rostering time and during shifts, escalation steps when limits are approached, individual fitness-for-work assessment, and the records kept. It sits between a short fatigue policy and a full fatigue risk management system, and it's the document clients and regulators actually ask to see.
Is a fatigue management plan a legal requirement in Australia?
The model WHS laws don't name a specific document, but they require businesses to manage fatigue as a foreseeable risk, and a written plan is the practical evidence that you do. Mining and resources regulators expect documented fatigue management, and heavy vehicle operations are subject to prescriptive NHVR work and rest requirements. In practice, client prequalification makes a written plan effectively mandatory for most site businesses anyway.
What should the limits in a fatigue management plan be?
They should come from your own risk assessment, but common starting points for Australian site work are a 12-hour maximum shift, a 10-hour minimum break, around 7 consecutive shifts with fewer for nights, and rolling caps on hours over 7 and 14 days. Count commute time in the daily total, and include a documented exception process; a limit that gets silently broken teaches crews the plan is optional.
Should commute time count towards fatigue limits?
Yes. A compliant 12-hour shift with a two-hour drive at each end is a 16-hour day, ending with the most dangerous drive of the week, and the roster can't see any of it unless the plan counts it. A door-to-door daily limit that includes the commute is the practical fix, alongside a journey rule so that past a set threshold the worker doesn't drive home.
What's the difference between a fatigue management plan and a fatigue policy?
A policy is one or two pages stating that the business recognises fatigue as a risk and commits to managing it. The plan is the working document underneath: the actual numbers, rostering controls, escalation triggers, fit-for-work checks and record-keeping. Most businesses have the policy; the gap that audits and incidents expose is almost always the plan.
Is a fatigue management plan template worth using?
For the structure, yes. The section headings transfer between businesses, and there's no prize for reinventing them. What a template can't supply is the content an auditor actually reads: your operation's real risks, limits your rosters can genuinely hold, and an escalation path naming people who exist. A downloaded plan with another industry's assumptions still inside it is arguably worse than no plan at all.
How often should a fatigue management plan be reviewed?
Annually at minimum, and immediately after any fatigue-related incident or near miss, any significant change to roster patterns or shift lengths, and any new client or site whose fatigue rules differ from yours. Reviews should look at actual hours, breaches, exceptions and TARP activations, not just re-read the document.
Is fatigue management software a legal requirement in Australia?
No single law mandates specific software. Australian WHS legislation does require employers to manage foreseeable fatigue risks, though, and a fatigue risk management system is one of the most effective ways to demonstrate compliance. In high-risk industries like mining and heavy transport, regulators increasingly expect documented evidence of systematic fatigue controls, and software provides the most reliable audit trail.
What should I look for when comparing fatigue management tools?
Focus on real-time roster integration rather than manual entry, mobile access for field workers, configurable alert thresholds that match your award and WHS obligations, audit-ready reporting, and ease of use for coordinators managing large crews under time pressure. A tool that's technically capable but too complex to use daily will be abandoned within a month.
What's the difference between fatigue monitoring and a fatigue risk management system (FRMS)?
Fatigue monitoring means tracking worker hours and rest periods. An FRMS is a broader framework of policies, controls and systems working together to manage fatigue as an organisational risk. Good software supports an FRMS but should be backed by solid workplace policies, worker education and supervisor training as well.
Does fatigue monitoring software work for FIFO operations?
Yes. FIFO operations are one of the primary use cases. Extended rosters, remote sites, compressed swing patterns and travel time between home and site make automated workforce fatigue tracking essential. Manual spreadsheet tracking can't keep up with a large FIFO workforce.
Does fatigue management software cover subcontractors as well as employees?
It should. Fatigue doesn't care whose payroll a worker is on, and a subbie pulling shifts across your sites accumulates hours exactly like an employee. Look for a platform that applies the same fatigue policies and visibility to every worker type on the roster, contractors and labour hire included.
Can it integrate with my existing payroll and rostering systems?
The best platforms, Humanz included, integrate fatigue monitoring directly with rostering and timesheets. Fatigue data flows automatically from your roster with no duplicate data entry, and payroll data can be cross-referenced to verify actual hours worked against scheduled hours.
Does it work for small trades businesses, not just large mining operations?
Yes. Large mining and construction operations have the most complex fatigue management needs, but small and medium trades businesses benefit just as much. A two-person electrical contracting business running emergency callouts can rack up dangerous hours quickly, and a mobile-based worker fatigue app keeps that visible without needing a dedicated safety manager.
How does fatigue management software handle variable shift patterns?
Modern FRMS software Australia platforms handle irregular shift patterns, rotating rosters and ad-hoc callouts as well as fixed weekly schedules. Humanz, for example, recalculates fatigue risk as roster changes are made, so a last-minute 12-hour callout is immediately assessed against the worker's recent hours and rest history.
What happens if a fatigue alert is ignored?
If a supervisor overrides a fatigue alert and an incident occurs, the alert record becomes critical evidence in any WHS investigation. A documented alert that was ignored increases liability exposure considerably. Good fatigue management software makes it easier to act on alerts than dismiss them, by surfacing replacement workers, suggesting roster adjustments or escalating the issue to management.
How do I get started with Humanz?
We work with businesses across construction, mining services, trades and logistics Australia-wide.
What limits can a fatigue policy set?
Shift duration limits, minimum breaks between shifts, consecutive shift caps, rolling hours limits and night shift rotation rules. In Humanz that includes maximum shift length, earliest and latest start times, longer minimum breaks after night work, caps on consecutive days and nights, rolling hour maximums across 7 to 28 days and 3 months, and controls on permanent night work. Each policy applies at business, client or site level.
Can different clients have different fatigue rules?
Yes. Set a policy at the client level and it applies to all of that client's sites. Set one at site level for individual sites. Anything without a specific policy falls back to your business default.
Does a fatigue warning block the shift?
No. It flags the breach so the scheduler can make an informed call with assessment tools and internal processes. The decision stays with your team.
How to see fatigue warnings?
Fatigue warnings appear on the schedule page and are visible to planners and schedulers.
How often are expiry alerts sent?
Every 3 days, via email, in-app alert, and push notification. They continue after expiry and stop automatically once the worker updates the item.
Do fatigue policies and expiry alerts cover subcontractors?
Yes. The same policies and alerts apply to subcontractors and labour hire workers scheduled through the platform, not just direct employees. That matters because audit questions about safe hours and current tickets don't distinguish between worker types, and neither should the system answering them.
Can I start from a template instead of building a policy from scratch?
Yes. When creating a policy you can start from a pre-populated template and adjust the limits to suit.
What is fatigue risk management software?
Software that turns fatigue rules (regulatory hours, internal policies, client requirements) into live rostering controls. Bookings are checked against accumulated hours with alerts as thresholds approach, and the records proving fatigue was managed build automatically.
What's the difference between a fatigue report and a fatigue gate?
A report tells you about a breach after the shift was worked. A gate checks the rule when the shift is being booked and stops the breach happening. Regulators and courts are considerably more interested in the second.
Does Humanz enforce NHVR work and rest hours?
Humanz enforces the fatigue policies you configure, including daily, weekly and rolling-window limits, minimum rest between shifts and night-hour caps. Operators encode their standard, BFM or internal limits as policies and the roster gates against them. Accreditation obligations themselves remain with the operator.
Who holds fatigue duties under the chain of responsibility?
More people than the driver. Under the HVNL's chain of responsibility provisions, schedulers, consignors and managers hold duties alongside drivers to ensure work demands don't induce fatigue breaches. A roster that pressures drivers into non-compliant hours implicates the business that built it, and subcontracted owner-drivers sit inside the chain too.
Can it handle drivers who also do depot or site work?
Yes. Hours count cumulatively across every shift type in the roster, which is exactly where manual systems fail. The Saturday depot shift quietly breaks Monday's driving limits.
Do depot and workshop crews need fatigue management too?
Yes. Workers outside the HVNL's prescriptive hours, like depot crews, loaders and mechanics on irregular hours, still sit under the model WHS duty to manage fatigue as a foreseeable risk. Their hours also interact with driving limits when the same people do both, which is exactly the combination manual tracking misses.
How do drivers see their fatigue status?
Through the app. They get warnings when they're approaching limits, and can see rest requirements alongside their roster, so the conversation happens before shift acceptance rather than roadside.
We run a mixed fleet across two states. Can policies differ?
Yes. Policies layer by business, client and site, so a WA mining contract's tighter limits can sit alongside standard rules for east-coast work, each enforced automatically for the relevant shifts.
What does fit for work mean?
Fit for work means a person is physically and mentally able to carry out their work safely, without impairment from fatigue, alcohol or drugs, injury, illness, medication or acute stress. In Australia the general WHS laws do not define the term; it is built from the business's duty to provide safe systems of work and the worker's duty to take reasonable care, and a workplace fit for work policy sets the actual standards. The Queensland and Western Australian mining regulations are the main places the phrase appears in legislation.
Who is responsible for fit for work?
Both the business and the worker. The business must eliminate or minimise the risk from fatigue and from alcohol and drug use so far as is reasonably practicable, including having a system to assess fitness for work before a shift. The worker must take reasonable care for their own safety, which Safe Work Australia describes as using the opportunities they have to sleep so they are fit for work, and must cooperate with reasonable policies, including telling their supervisor when they are not fit.
What should a fit for work policy include?
A fit for work policy should set out its scope, the standards (sleep and hours thresholds, the alcohol and drug rule, medication disclosure, injury and return-to-work clearance), the pre-shift declaration, what a supervisor does when a worker is not fit, the testing and privacy rules, the support available such as an employee assistance program, and a review cycle. The standards should be taken from the business's fatigue management plan so the two documents agree. The most commonly missing parts are the supervisor's response, the privacy rules and the review date.
What is a fit for work declaration?
A fit for work declaration is a short statement a worker completes before a shift confirming they are fit to carry out their duties, usually with questions on sleep in the last 24 and 48 hours, alcohol within the site's cut-off, medication that could affect alertness, injury or illness, anything else affecting concentration, and fitness to drive if the day includes driving. It is a record of what the worker declared and what the supervisor did, not a medical assessment, and it is backed up by the supervisor's observation at pre-start.
What is a fit for work certificate?
A fit for work certificate is a statement from a doctor that a person can return to work after an injury or illness, either to their normal duties or to restricted duties with the limits listed. In a workers' compensation claim it is usually called a certificate of capacity, or a work capacity certificate in Queensland. It describes the person's capacity rather than the job, so the employer still has to match the restrictions to the actual tasks, and it does not replace the daily pre-shift check.
What happens if a worker is not fit for work?
The worker is stood down from safety-critical tasks for that shift, without penalty, and either given alternative duties that suit their state or sent home with transport arranged if the reason was fatigue or alcohol. The supervisor records what was declared and what was done, and the gap is filled from the roster. Businesses that punish an honest No teach crews to declare fit when they are not, which is the opposite of the policy's purpose.
Is a fit for work check a legal requirement in Australia?
Not by that name under the general WHS laws, which require businesses to manage the risks of fatigue and of alcohol and drug use so far as is reasonably practicable without prescribing a specific check. Safe Work Australia's fatigue guidance lists a system to assess fitness for work before a shift among the expected controls. In Queensland coal mining, the safety and health management system must include fitness provisions covering fatigue, other impairment and drugs, and Western Australia's mines regulations carry fitness for work provisions on fatigue and on alcohol and drugs. Heavy vehicle and rail work have their own statutory regimes.
What is form builder software?
Form builder software lets you create and customise your own digital forms (prestart checks, incident reports, inductions, approvals) without writing code. The better tools add conditional logic, photo and signature capture and mandatory fields, and store every submission with an audit trail so you can report on the data.
Why are digital forms better than paper or PDF forms for field teams?
Paper and fillable PDFs don't enforce mandatory fields, capture photos at the source, link to the relevant job, or create a searchable record. Digital forms do all of that, reach the right person straight away, and let you analyse trends across submissions. None of that is practical on paper.
Do you need a developer to build or change a form?
No, and you shouldn't accept a tool that requires one. A good form builder lets an admin assemble a prestart, incident report or approval from drag-and-drop fields and publish it in minutes. That matters beyond convenience, because the easier a form is to change, the more likely it stays current with how the work is actually done.
Can a custom forms app work without internet on site?
It should. Good mobile prestart checklist software lets workers complete forms offline and syncs automatically once they're back in range. Field operations regularly work in low-signal areas, so offline capability is essential rather than a nice-to-have.
Are digital SWMS and incident forms accepted in Australia?
Yes. There's no requirement for safety records to be on paper. What matters is that the form meets the content and sign-off expectations the regulator lays out for SWMS, and that submissions are stored with a clear audit trail, which digital handles better than paper.
Which form should a field team digitise first?
The daily prestart. It's high volume and repetitive, so workers build the habit quickly and the payback shows up within days rather than months. Rebuild your existing form with its familiar wording and order first, then improve it once the crew trusts the new format.
How do forms connect to rostering and compliance?
Forms tie to jobs, shifts and individual workers, so a completed induction or sign-off can act as a compliance gate before someone is rostered to a task. This links your forms to credential tracking, onboarding and scheduling rather than leaving them as standalone documents.
Where should completed forms be stored?
In a single, searchable system with a timestamp and the submitter's name on every submission. That permanent audit trail is what lets you produce records on request and report on what your forms are telling you. Scattered emails and shared drives can't deliver it.
Does Humanz use AI to complete forms?
No. Forms in Humanz are designed, completed and reviewed by people. Your admins build them, your crews fill them in on the mobile app, and submissions are stored for tracking and reporting. There's no AI auto-filling or interpreting safety records today. That capability sits on our roadmap.
What is heat stress?
Heat stress is when the body cannot cool itself fast enough to keep its core temperature at a safe level of around 37°C, as WorkSafe Queensland defines it. It depends on the environment (air temperature, humidity, radiant heat, air movement), the work (intensity, duration, clothing and PPE) and the person (acclimatisation, fitness, hydration, health, medications). Left unmanaged it leads to heat-related illness, from heat cramps and heat exhaustion through to heat stroke.
Is there a maximum temperature for working outside in Australia?
No. Safe Work Australia says there is no maximum temperature at which workers must stop work, because one number cannot account for humidity, air flow, workload and acclimatisation. The duty is to eliminate or minimise the risk, which can mean rescheduling work until it is cooler. Some enterprise agreements, site rules and agreed workplace heat plans set their own stop-work triggers, and those still apply.
What are the first signs of heat stress at work?
Early signs include thirst, sweating, muscle cramps, headache, dizziness, nausea, slower thinking and visual disturbances. Because confusion is a sign of heat stroke, workers in the heat should check on each other rather than rely on spotting the signs in themselves.
What is the difference between heat exhaustion and heat stroke?
Heat exhaustion is a serious illness with thirst, weakness or cramps, headache, dizziness or fainting, and a normal or raised body temperature. Heat stroke is a life-threatening emergency in which body temperature rises sharply and the brain is affected, causing confusion, poor coordination, slurred speech, seizures or collapse. Heat exhaustion can become heat stroke, and Safe Work Australia says to call an ambulance immediately if you suspect either.
What should you do if someone has heat stroke at work?
Call 000 for an ambulance immediately, then start cooling the person while you wait. Safe Work Australia's first aid guidance is to move them somewhere cool with moving air, lie them flat, remove unnecessary clothing including PPE, and immerse the body from the neck down in cold water for 15 minutes where practicable. If that is not possible, wet the skin, fan air over them, put cold packs at the neck, groin and armpits, and give fluids only if they are fully conscious.
How do you roster crews for hot weather?
Start earlier so heavy work is done before the hottest part of the day, shorten shifts or add cool breaks, and rotate workers between sun and shade. Ease new starters and anyone back after a week or more away in gradually, pair workers up, and keep a trained first aider on every shift. Decide in the afternoon and tell the crew before they knock off.
What should a hot weather policy include?
A hot weather policy should cover its scope, who monitors conditions, triggers and the controls at each level, acclimatisation, buddy and lone work rules, clothing and PPE, the emergency response, stopping work without penalty, how roster changes are communicated, and records and review. Write it with workers and their health and safety representatives.
How do I check a high risk work licence?
Check it with the regulator in the state that issued it, by licence number. NSW searches by name or number on Verify NSW, Victoria and WA need the licence number, and Queensland, South Australia and the NT also need details off the card such as the date of birth. Tasmania has no online lookup, so you ask WorkSafe Tasmania. Then sight the card and match the photo and name to the person.
How long does a high risk work licence last?
Five years from the day it is granted, in every state and territory, unless it is suspended or cancelled earlier. Adding a class later does not extend the date; the whole licence expires five years after it was first issued. The expiry date is printed on the card.
How do I renew a high risk work licence?
Apply to the regulator that issued the licence, before the expiry date, and declare that you have maintained competency in each class. Every state except Tasmania renews online; Tasmania renews at a Service Tasmania outlet. Windows differ: WA opens 90 days out, the ACT six months, and SA and Tasmania will not renew more than 30 days before expiry.
What happens if my forklift licence expires?
You cannot operate a forklift until it is renewed, and in every state you have 12 months after the expiry date to renew without retraining. Apply in that window and you stay unlicensed until the renewal is approved. Past 12 months you retrain with an RTO, get reassessed by an accredited assessor and apply for a new licence, though Queensland and Victoria can accept a later renewal in exceptional circumstances.
Is a high risk work licence valid in every state?
Yes, a current photographic high risk work licence from any Australian state or territory is recognised in all the others, so no transfer is needed to work interstate. Safe Work Australia's advice is still to confirm with the regulator where you will be working. When the licence comes up for renewal, most states expect a holder who has moved to renew or transfer it in the state they now live in.
What is the difference between a high risk work licence and a VOC?
A high risk work licence is a legal requirement issued by the state regulator for defined classes of work, such as forklift or dogging, and it proves the holder passed the national assessment for that class. A verification of competency is an employer's or site's own practical check that the person can operate a specific machine safely, and it is not a licence. Most sites require both for licensed plant, and a VOC alone for plant that needs no licence, such as excavators and loaders.
How do I check a forklift licence in Queensland?
Use the Office of Industrial Relations High Risk Work Online Register. It needs the holder's first name, surname and date of birth, the licence class (LF for a forklift or LO for an order picker), and at least two further details such as the licence number and expiry date, so you need the card or a photo of it. The result confirms the licence status; without the card, WorkSafe Queensland's licensing line can confirm whether a licence is valid.
Is there a legal maximum number of hours you can work in one shift in Australia?
There is no single national maximum shift length that applies to all Australian workplaces. Maximum ordinary hours per shift are set by the relevant modern award or enterprise agreement, and typically sit at 8, 10 or 12 hours depending on the industry and shift arrangement. Separately, work health and safety law requires employers to manage fatigue risk regardless of what the award permits.
How many days in a row can you legally work in Australia?
There's no single national cap on consecutive days worked. Some modern awards limit days worked before a break, particularly relevant on shutdowns and swing rosters, and the exact provision depends on the award covering the employee. On top of that sits the WHS duty to manage fatigue, which treats consecutive shifts and cumulative hours as risks regardless of what the award technically permits, and most large site owners impose tighter fatigue rules of their own.
Is a 12-hour shift legal in Australia?
Generally yes, where the applicable award or enterprise agreement permits it. Many awards allow ordinary shifts of up to 12 hours under specific shift arrangements, and even longer shifts aren't automatically unlawful. Legality isn't the whole question, though, because the employer's WHS duty to manage fatigue applies regardless, and a 12-hour shift at the end of a long run of them is a materially different risk even when every individual shift sits inside the award.
How many hours must you have off between shifts in Australia?
The minimum break between shifts is set by your award or agreement rather than by a single national rule. Ten hours is a common minimum in many modern awards, sometimes reducible to eight hours by agreement in defined circumstances. Because this is an award-level provision, the exact figure depends on which award covers the employee, so check the specific instrument rather than relying on a general figure.
What are reasonable additional hours under the National Employment Standards?
The National Employment Standards allow an employer to request additional hours beyond 38 per week where those hours are reasonable. Reasonableness is assessed against factors including health and safety risk, the employee's personal circumstances and family responsibilities, operational requirements, whether extra compensation applies, the notice given, and the employee's level of responsibility. It is a balancing test, so the same number of hours can be reasonable in one situation and unreasonable in another.
Do heavy vehicle drivers have different hours limits?
Yes. Drivers of fatigue-regulated heavy vehicles are subject to the Heavy Vehicle National Law, which sets specific maximum work times and minimum rest times across multiple rolling periods, varying by accreditation tier and whether the driver operates solo or two-up. As an anchor, the NHVR's Standard Hours option caps a solo driver at 12 hours of work time in any 24-hour period and 72 hours in any seven days, with at least seven continuous hours of stationary rest. These limits apply in addition to award entitlements and work health and safety duties. Western Australia and the Northern Territory operate separate heavy vehicle fatigue arrangements.
Can an employee agree to work longer hours than the award allows?
Agreement does not remove an employer's work health and safety duty to manage fatigue risk, and it cannot override entitlements that an award or the National Employment Standards guarantee. Some award provisions, such as reducing a break between shifts, can be varied by agreement in defined circumstances, but the scope to do so is set by the award itself. Consent is never a substitute for a fatigue risk assessment.
What is qualification tracking software?
It records every licence, ticket, induction and competency your workers hold, tracks expiry dates, and alerts the right people before anything lapses. Better systems also enforce credential requirements at the point of rostering, rather than just keeping a list.
What credentials should a field business track?
Everything with an issuer and an expiry date. That means High Risk Work Licences, trade and occupational licences, driver and plant tickets, VOC records, White Cards, site and client inductions, medicals and drug-and-alcohol clearances, plus refresher-based training like first aid, working at heights and confined space. No two clients ask for exactly the same set, which is why the register has to map requirements to clients and sites rather than holding one flat list.
How do licence expiry alerts work?
Expiry alerts watch each credential's date and notify the worker ahead of time by email, in-app message and push notification. Good systems repeat until the item is renewed, keep alerting after expiry, and stop automatically once the updated document is uploaded.
What is a compliance gate in rostering?
A check applied when a worker is assigned to a shift. If the worker is missing a required credential or holds an expired one, the system flags or blocks the assignment, catching non-compliant workers before they reach site.
Can different clients or sites require different credentials?
Yes. A capable induction management software setup lets you map different credential and induction requirements to different clients and sites, so a worker compliant for one site isn't automatically treated as compliant for another.
When should worker credentials be captured?
At onboarding, before the worker is ever assigned a shift. Capturing licences, tickets and inductions as someone joins means expiry dates go in as the documents arrive and the alert clock starts immediately. It also prevents the most common failure mode, the worker who's been on the books for months with a gap nobody noticed.
Why are spreadsheets risky for certificate and credential tracking?
A spreadsheet doesn't chase anyone, updates lag reality, documents end up scattered, and there's no link to the roster. As worker numbers and client requirements grow, the gaps multiply.
Does Humanz use AI to track credentials?
No. Humanz credential tracking is rules-based: you configure requirements and expiry settings, alerts fire on schedule, and compliance gates apply at rostering. AI is on the roadmap, but not part of how credential tracking works today.
What is a verification of competency?
A verification of competency, or VOC, is a practical assessment confirming that a worker can operate specific plant or perform a specific task to the required standard. An assessor observes the worker on the equipment, measures performance against the relevant unit of competency or standard, and records the outcome with a date and scope.
What does VOC mean in training?
VOC stands for verification of competency. Despite the phrase VOC training, a VOC is an assessment, not a course: it checks that earlier training has stuck on the plant or task in front of the worker. Training providers often run the assessment, and refresher or gap training may follow where the assessor finds a shortfall.
Is a VOC a legal requirement in Australia?
No law names the VOC itself. The legal driver is the WHS duty to ensure workers are competent for the work they perform, and a VOC is the accepted way to demonstrate that for plant operation. In practice most mining and many construction principals mandate VOCs through their site standards, which makes them contractually unavoidable even where legislation doesn't name them.
What is the difference between a VOC and a high risk work licence?
A high risk work licence is issued by a state WHS regulator for legislated classes of work, such as certain cranes and forklifts, and is valid across Australia. A VOC is not a licence. It's evidence of current competency on specific equipment, often demanded per site, and it applies equally to plant that needs no licence at all, like excavators and loaders.
Who can conduct a VOC?
For assessments that need to withstand client or regulator scrutiny, an assessor with current assessor qualifications and demonstrated currency on the plant, typically working through or with a registered training organisation. In-house checks by a competent senior operator are useful between formal cycles but usually won't satisfy a tier-one site standard that specifies independent or RTO-linked assessment.
How long does a VOC last?
There's no legislated expiry. Most businesses and sites work on one to two years for high-consequence plant, with earlier re-verification after incidents, long absences or a change of equipment type. The review date recorded on the VOC is what counts, and different sites are free to set different cycles.
What should a VOC record include?
The operator's name, the assessor's name with their qualifications and currency, the plant assessed down to make and model, the standard or unit of competency referenced, the assessment method, the outcome, and both the assessment date and a review date. The format matters far less than the fields. A one-page form that captures all of them beats a glossy booklet that misses the review date, because a VOC without an expiry quietly becomes permanent.
Is a VOC transferable between sites?
Often not. Many mining and construction principals require verification to their own site standard, so a VOC accepted at one operation can mean nothing at the next one up the road. Treat an incoming VOC as a claim rather than a fact, sight the actual record with its scope and dates, and budget for site-specific re-verification in the mobilisation timeline where the client's standard demands it.
Does the WHS (Mines) Regulations 2022 set a maximum shift length?
No. Regulation 640 is entirely risk-based and contains no numbers, and the regulations as a whole set no maximum shift length, minimum break or cap on consecutive shifts. Numeric thresholds come from guidance like the Working hours code of practice, from awards and enterprise agreements, and from client site standards. The duty is to manage the risk and be able to demonstrate how.
What does regulation 640 actually say?
It requires the mine operator, in complying with regulation 617, to manage risks to health and safety associated with worker fatigue, and that is the entire provision. There's no maximum shift length, no minimum break and no cap on consecutive nights anywhere in it. The numbers WA mining rosters actually run on come from the Working hours code of practice, awards and enterprise agreements, and client site standards, and the duty is to set safe limits for your own operation and prove you applied them.
Who is responsible for fatigue management on a WA mine site?
Regulation 640 places the specific fatigue duty on the mine operator, but regulation 617 requires every business or undertaking at the mine to manage risks from mining operations, and section 19 of the WHS Act gives each employer a primary duty to its own workers. A contractor or labour hire provider holds duties at the same time as the operator. In practice the operator's safety management system and the contractor's plan are meant to work as one arrangement.
Is the Working hours code of practice legally binding?
No, and it says so itself: a code does not have the same legal force as a regulation. It continues as a transitional code under the WHS Act, codes are admissible in court proceedings, and a court may use one as the standard when assessing the practices a business used instead. Ignoring it without a well-documented alternative is a poor position to defend.
Do mine workers have to be trained on fatigue controls?
Yes. Regulation 675B requires workers to be given information, training and instruction on the control measures that apply to their work, and names fatigue controls specifically. Unlike regulation 640 it carries its own penalty, so crews who have never been trained on your fatigue controls are a live compliance gap rather than a best-practice shortfall.
What records prove fatigue was managed on a mine roster?
The documented fatigue limits and the plan they belong to, the roster as planned, the hours actually worked, and the record of allocations that were flagged against the limits along with what was done about them. Training records matter too, because regulation 675B requires workers to be given information, training and instruction on fatigue control measures. Records showing communication across shift changes round out the set.
Can you check a White Card online?
Yes in NSW, Victoria and WA, and no elsewhere, because there is no national White Card register. NSW cards are checked on the Verify NSW register by name or card number, Victorian cards on WorkSafe Victoria's validation search by card number and surname, and WA cards on WorkSafe WA's database by card number or by name and date of birth. In Queensland and South Australia the RTO that issued the card confirms it; in Tasmania, the ACT and the NT the issuing agency does.
How do I check a White Card in WA?
Search WorkSafe WA's construction induction training card database, which runs through the WA Online Licence Search, by card number or by the holder's name and date of birth. The result shows the card details and the RTO that issued it. Then sight the card and match the name to photo ID, because the database confirms the card exists, not that the person holding it is the holder.
How do I check a White Card in NSW?
Search the Verify NSW white card register by the card holder's name or card number. SafeWork NSW maintains the register and advises checking that a holder has a current card before engaging them for work. Workers can find their own card details through Service NSW's White Card check.
What is WHS software?
WHS software is a system for managing work health and safety records and processes in one place, including credentials and licences, inductions, safety forms, hazard and incident reports, and the audit trail behind them. It is also sold as WHS management software, WHS compliance software and, in Victoria, OHS software. The more capable products apply those records as rules when work is allocated, rather than only storing them for reporting.
Is OHS software different from WHS software?
No, they're the same category of product under two names. Victoria never adopted the model WHS laws and still runs its own Occupational Health and Safety Act, so Victorian buyers say OHS where everyone else says WHS. What's worth checking isn't the label but whether the tool handles the framework your regulator enforces, since forms, duty-holder fields and exported reports should use the vocabulary your inspector does.
Is WHS software a legal requirement in Australia?
No, not on our reading of the laws. The model WHS laws and Victoria's OHS Act set duties rather than naming tools: manage risks so far as is reasonably practicable, consult workers and keep certain records, and none of them requires those records to be kept in software. A paper system that meets the duties can comply. Software earns its place when paper and spreadsheets can no longer show who was cleared for a job on the day it was done.
Do the same WHS laws apply in every Australian state?
Not quite. Every jurisdiction except Victoria has enacted the model WHS laws, but each does so through its own Act and regulator, and Victoria operates under separate occupational health and safety legislation. The core duties are broadly consistent, while specific regulations, codes of practice and notification requirements vary, so multi-state businesses need to check each jurisdiction they work in.
What is the difference between a compliance register and a compliance gate?
A register stores credentials and their expiry dates and can report on them. A gate applies that information at the moment work is allocated, preventing a worker being rostered onto a job they are not currently cleared for. A register tells you what happened; a gate changes what happens.
Does WHS compliance software need to cover subcontractors?
Yes. Work health and safety duties extend to workers a business directs or influences, not only direct employees. If subcontractor credentials sit outside the system used to allocate work, the compliance picture is incomplete precisely where blended crews make it hardest to keep track.
Does WHS compliance software replace a safety manager?
No. It removes the manual tracking that consumes a safety manager's week, such as chasing expiry dates and collecting paper forms, so the role can concentrate on risk assessment, consultation and site presence. The obligations remain with the business and its officers regardless of what software is used.
What is a WHS management system?
A WHS management system is the set of policies, procedures, plans and records a business uses to manage work health and safety across all its work. It typically covers a WHS policy and responsibilities, risk management, consultation, training and competency, contractor management, incident reporting and investigation, monitoring and audit, and management review. It is also called a safety management system, and the Australian standard for one is AS/NZS ISO 45001:2018.
Is a safety management system the same as a WHS management system?
Yes, they are two names for the same thing. Both describe the policies, procedures, plans and records a business uses to manage health and safety systematically, and AS/NZS ISO 45001:2018 is the Australian standard for either. The WHS Regulation also uses the term certified safety management system, meaning one that complies with AS 4801:2001 or an equivalent system the regulator determines, which an applicant for a class A asbestos removal licence must have in place.
Is a WHS management system a legal requirement in Australia?
Not by that name for most businesses. The WHS Acts set duties rather than formats, including safe systems of work, consulting workers and, for officers, due diligence to ensure the business has and uses processes to manage risks. A documented system is the usual way to meet and demonstrate those duties, and some licences, Commonwealth-funded building contracts and principal contractors require one outright.
What is the difference between a WHS management system and a WHS management plan?
A WHS management system covers the whole business and every job it does, while a WHS management plan covers one construction project. The plan is a legal requirement for the principal contractor and must be written before work on the project starts. A working system supplies the plan's consultation, incident and site rule arrangements.
Do you need ISO 45001 certification?
No, ISO 45001 certification is voluntary. A business can implement the standard without certifying, or have a third-party certification body audit its system. Certification is mainly worth the cost when clients, tender panels or prequalification schemes ask for it. Commonwealth-funded building work above the funding thresholds has a separate requirement: the head contractor must hold Federal Safety Commissioner accreditation.
What should a WHS policy include?
A WHS policy should state the business's commitment to health and safety, who it covers, who is responsible for what, how workers are consulted and raise concerns, and when it will be reviewed. It should be signed by the most senior person, suit the nature and scale of the business's risks, and fit on about one page.
What is the Federal Safety Commissioner's WHS Accreditation Scheme?
It is the scheme under the Federal Safety Commissioner Act 2022 that decides which builders can take head contracts for Australian Government funded building work. Accreditation is required for directly funded projects worth $4 million or more, and for indirectly funded projects with $4 million or more of building work where the Commonwealth contributes at least $6 million and at least half the project, or $10 million or more regardless of share. Builders apply online and are audited on site, with no fees, and accreditation is recognised against the WHS elements of the building prequalification schemes in every state and territory except Tasmania.
Other topics
Ready to see Humanz on your own roster?
Free 30-minute walkthrough, we'll use your real crews, sites and shift patterns.


